1.1 Appearance: lens circuit board without deformation, clean without dirt, no false welding, solder spot, light bright, each mark symbol should be clearly visible, the focal length is clear.1.2 Structure size: 38mm×38mm ,PCB board thickness: 1.2 mm.1.2.1 Circuit board dimensions should be 38mm ×38mm surface device height should be less than 4mm.1.2.2 Slot with PCB aperture of 2.5*3.3mm (four positioning holes).1.2.3 The height of the lens from the front of the PCB is 21.1mm±0.2mm.1.3 Environmental and electrical parameters.1.3.1 Temperature: -20℃-- +60℃,1.3.2 Working voltage: DC-12V (9-18V).1.3.3 Working current: ≤35mA.1.3.4 Video interface output impedance force should be 75Ω(1Vp-p, 75Ω);1.3.5 The standard color should be distinguished on the camera under the condition of illuminance greater than 0.2LUX Color, and the color of the monitor image shall be consistent with the color of the color card.1.3.6 The horizontal resolution of the camera is 600TVL (collectively referred to by the market).
Model
SKY-DL-2103A
Camera element
1/4 sensor
Effective pixel
648×488
Image format
PAL
Sync mode
Built-in sync
Horizontal resolution
600TVL (market collectively)
Signal-to-noise ratio
>48dB
Minimum illumination
0.01UX
Backlight compensation
Automatic
Electronic shutter
1/50Sec-12.5uSec
White balance
Automatic
Gamma Correction
> 0.45
Video output
1.0Vp-p75ohm
Power required
12V (9-18V)
Current consumption
≤35mA
Lens
3.6mm 650
Lens horizontal Angle
52 degrees
1. The detection camera should meet the requirements of Article 1.1;2. Use vernier calipers to measure the shape of the camera, positioning hole, lens height and other, should be full meet the requirements of 1.2.1 in 1.2;3. the camera is connected to the display module and the display for detection, and the image shall not be distorted Image distortion;4. When the camera is working, the oscilloscope is used to measure the video output amplitude of the video signal test: 0.8~1.2VP-P/75Ω;5. Connect the cable between the camera and the display, place the standard color card 0.4 meters in front of the camera, and the image on the observation monitor should be consistent with the real scene;6. High and low temperature test: the temperature is 60℃ for 12h, and the power is added to work normally. The temperature is negative 20℃ for 12h, and the power test can work normally.7. The camera lens should be 3.6mm lens with a horizontal Angle of view of 52°, and there should be no darkness around the image angle;8. Stability test, continuous aging for 24 hours, there should be no failure;9. camera minimum illuminance test, camera minimum illuminance 0.01LUX.(no LED light).3.1 Vernier caliper with an accuracy of ±0.02 ㎜.3.2 24 color standard color card, gray comprehensive test chart.3.3 regulated power supply for display module camera,14-inch color monitor.
Optical format
1/4
Pixel array
640×480
Video format
PAL/NTSC
Video signal
CVBS
Lens focal length
optional
Horizontal angle
optional
Lens height
optional
Working voltage
DC 9-15V
Dimension
32×32 / 38×38
Analog 800 wire
Q1. Can the Camera module visual doorbell be integrated with access control systems?A: Yes, SKYNEX's Camera module visual doorbell can be integrated with access control systems to enhance security and control building entry.Q2. What is the expected response time of SKYNEX's Camera module visual doorbell?A: The expected response time of SKYNEX's Camera module visual doorbell may depend on various factors, such as network connectivity and the connected display's responsiveness.Q3. Can the Camera module visual doorbell capture images even in low-light outdoor conditions?A: Yes, SKYNEX's Camera module visual doorbell with night vision capabilities can capture images in low-light outdoor conditions.Q4. Does SKYNEX offer a mobile app for controlling the Camera module visual doorbell?A: SKYNEX may provide a mobile app that allows users to control and monitor their Camera module visual doorbell remotely.Q5. Is the Camera module visual doorbell compatible with both Android and iOS devices?A: Yes, SKYNEX's Camera module visual doorbell is typically compatible with both Android and iOS devices through their respective mobile apps.
