1.1 Appearance: lens circuit board without deformation, clean no dirt, no false welding, solder spot, bright, each mark symbol should be clearly visible, the focal length is clear;1.2 Structure size: 38mm×54mm PCB board thickness; The 1.6 mm;1.2.1 Circuit board dimensions should be 38mm * 54mm; surface device height should be less than 4mm.1.2.2 Slot with PCB aperture of 2.5*3.3mm (four positioning holes);1.2.3 The height of the lens from the front of the PCB is 21.1mm±0.3mm;1.3 Environmental and electrical parameters;1.3.1 Temperature: -20℃~ +60℃,1.3.2 Working voltage: DC-12V (9-18V).1.3.3 Working current: ≤55mA.1.3.4 Video interface output impedance force should be 75Ω(1Vp-p, 75Ω);1.3.5 Under the condition of illumination greater than 0.2LUX, the standard color palette should be distinguished on the camera, and the color of the monitor image should be consistent with the color palette.1.3.6 The horizontal resolution of the camera is 1000TVL (collectively referred to in the market).
Model
SKY-DL-2106
Camera element
1/4 sensor
Effective pixel
1280 x 692
Image format
PAL
Sync mode
Built-in sync
Horizontal resolution
1000TVL (market collectively)
Signal to noise ratio
>45dB
Minimum illumination
0.01UX
Backlight compensation
Automatic
Electronic shutter
1/50Sec-12.5uSec
White balance
Automatic
Gamma Correction
> 0.45
Video output
1.0Vp-p75ohm
Power required
DC 12V (9-18V)
Current consumption
≤55mA
Lens
3.6mm 650
Lens horizontal Angle
51°
2.1 The detection camera should meet the requirements of Article 1.1;2.2 Use vernier calipers to measure the shape, positioning hole, lens height and others of the camera, which should meet the requirements of 1.2.1 in 1.2;2.3 The camera is connected to the display module and the display for detection, and the image shall not be distorted and other image distortion;2.4 When the camera is working, the oscilloscope is used to measure the video signal video output amplitude test: 0.8~1.2VP-P/75Ω;2.5 Connect the cable between the camera and the display, place the standard color card 0.8 meters in front of the camera, and the image on the observation monitor should be consistent with the real scene;2.6 High and low temperature test: the temperature is 60℃ for 12h, the power is added to work normally, the temperature is negative 20℃ for 12h, the power test can work normally;2.7 Camera lens 3.6mm lens horizontal Angle of view 51°, no dark Angle around the image;2.8 Stability test, continuous aging for 24 hours, there should be no failure;2.9 Camera minimum illuminance test, camera minimum illuminance 0.01LUX.(no LED light).3.1 Vernier caliper with an accuracy of ±0.02㎜.3.2 24 color standard color card, gray comprehensive test chart.3.3 regulated power supply for display module camera, 14 inch color monitor.
Optical format
1/4
Pixel array
1280 (H) ×720 (V)
Image resolution
AHD720P CVBS 1000TVL
Video format
PAL/NTSC
Video signal
AHD/CVBS
Lens focal length
optional
Horizontal Angle
optional
Lens height
optional
Working voltage
DC 9-15V
The overall dimension
38×54
Fill light optional with LED light
Analog 600 wire
Q1. Can I access the recorded video footage remotely?A: If the Camera module visual doorbell is equipped with recording capabilities and connected to a network, you may be able to access recorded video footage remotely through a mobile app or web interface.Q2. Does SKYNEX offer cloud storage for video recordings?A: SKYNEX may offer cloud storage options for video recordings, allowing users to store their recorded footage securely in the cloud.Q3. Can I get a live video feed from the Camera module visual doorbell on my smartphone?A: Yes, if the Camera module visual doorbell is connected to a smartphone app or compatible software, you can receive a live video feed on your smartphone when someone rings the doorbell.Q4. How does the Camera module visual doorbell handle power outages?A: If the Camera module visual doorbell is powered by batteries, it will continue to function during power outages. However, if it is connected to the building's electrical system, it may be affected during power failures.Q5. Can the Camera module visual doorbell be integrated with other security devices?A: Yes, SKYNEX's Camera module visual doorbell can be integrated with other security devices, such as security cameras, alarm systems, and access control systems, to create a comprehensive security solution for the building.
